CrossPeak 1 by Hyperlite Mountain Gear

A freestanding, 1-person, single-walled Dyneema® tent 

The CrossPeak 1 tent by Hyperlite Mountain Gear brings the same freestanding design and rock-solid stability of the proven CrossPeak 2 shelter. Dialed in to strike the optimal balance of weight, durability, waterproof protection, and roomy livability, it is a streamlined shelter made for solo adventures. This freestanding tent's small, sleek layout allows it to be pitched almost anywhere, from rocky and rooty soils to tent platforms or a small stealth camping spot. The CrossPeak 1 is made with a durable blend of Dyneema® Composite Fabrics, ensuring protection in all weather while keeping the weight of this tent minimal. Feel prepared for a variety of conditions with the ultralight CrossPeak 1 shelter. 

Features:

• Interior Accommodations: lots of headroom, one deep zippered vestibule, one storage pocket, clothesline attachment loops
• Floor Plan: accommodates a wide sleeping pad with plenty of space for gear beside and below it
• Waterproof, lightweight, and durable fabric
• Aluminum poles are light, reliable, and strong and outperform carbon poles with a negligible weight penalty
• External pole sleeves from 20D sil-nylon create a strong, reliable structure and make pitching smooth and consistent every time
• Adjustable ventilation at the head and foot end allows for airflow to keep condensation at a minimum
• Magnetic door tie-backs make tying back doors a breeze
• In tough weather conditions, tent stability can be reinforced with trekking poles using the pole retention straps and additional guylines on the head and foot panel, and pole tie-out points
  
• Reinforced tie-outs with high-visibility orange tie-out loops to provide critical structural reinforcement and added strength in challenging storms
• Latter Locks allow for precise and easy tension adjustments, guaranteeing a taut and stable pitch every time
• Reflective bindings and clearly marked pole intersections ensure quick, intuitive setup and easy tent location, even in the dark

Includes:

• CrossPeak 1 tent
• Dyneema® Composite Fabric 0.75 tent stuff sack
• Dyneema® Composite Fabric 0.96 pole stuff sack

_______________________________________________

Specs

Seasons: 3-season single-walled shelter

Capacity: 1 person

Doors: 1

Weight: 28.7oz | 813g

• Tent: 17.2oz | 487g
• Poles: 11.5oz | 326g

Dimensions:

• Packed Dimensions:
  • Shelter: 8" x 6" x 5" | 20cm x 15cm x 13cm
  • Poles: 15.25" x 2.25" x 2.25" | 39cm x 6cm x 6cm
• Vestibule Area: 7.33 sq ft |  sq m
• Insert Area: 18.6 sq ft |  sq m
• Width at Head: 32" | 81cm
• Width at Foot: 29" | 74cm
• Length: 88" | 223 cm
• Height: 42" | 107 cm

Recommended Gear: NOT Included

• 6-8 tent stakes
• 2 Trekking Poles (for extra roof support in windy conditions or heavy precipitation)
• Extra Guy Line (for additional Tie-outs in windy conditions or heavy precipitation)

Materials: Dyneema® Composite Fabric 0.55, Dyneema® Composite Fabric 0.96, No-See-Um Mesh

Made in Mexico

Based in Biddeford, ME | Est. 2010

_______________________________________________

Setup Instructions: 

Make sure campsite is clear from sticks, rocks, or other sharp pointed objects.

• Remove shelter from the stuff sack and close the vestibule door zipper.
• For optimal pitch, lay out shelter on flat, level ground.
• Stake out each of the 4 corners at 90 degree angles from each other.
• Adjust pole to a minimum pole height of 130cm (install pole jack to supplement height if necessary).
• Unzip the door and insert the pole, placing the bottom of the pole through the loop sewn into the bottom of the bathtub floor.
• Zip door.
• Adjust the 2 front corners of the shelter so that the front corner seams become taut.
• Adjust the 2 back corners of the shelter so that the back corner seams become taut.
• Stake out the door tie-out, tighten.
• Stake out rear perimeter tie-out enough to take any looseness out of the panel. DO NOT overtighten.
• To increase stability in higher winds, we recommend attaching additional guyline to the front apex tie-out.
• To mitigate panel deflection in higher winds, we recommend utilizing the 4 mid-panel tie-outs AND the pre-attached shock cord loops. DO NOT over-tension these points as to disfigure the pitch of the shelter.

Ventilation helps control condensation and temperature inside the tent.

• Door can be rolled up to provide maximum air flow and visibility.
• Unclip the door from the tie-out, roll it up, and store using the magnetic clasp.
• Large vents on both side panels are adjustable by reshaping the plastic brim.

Care Instructions: Take the time on a dry, sunny day to spot-clean any areas that need it. A soft, damp cloth and a mild soap (non-detergent and non-oil-based soaps work well, do not bleach). Air-dry your tent by leaving it out to hang dry. Make sure your tent is completely dry before long-term storage.